Planning Chimney Reconstruction in Brick
Chimney reconstruction in Brick is for a chimney the mortar and brick can no longer hold together: loose or spalled brick, a crown that has broken apart, or a stack that has started to lean. We inspect it from the roof, photograph the damage, and tell you how far down the rebuild needs to go before quoting. Our Old Bridge office is about 35 minutes away.
Most rebuilds stop at the roofline. The chimney is taken down to sound brick, relaid with new mortar, capped with a new crown, and flashed back into the roof with step and counter flashing.
Brick Township is in northern Ocean County, on Barnegat Bay and the Metedeconk River.
How Far Down a Rebuild Goes
A rebuild goes down to where the brick and mortar are sound again. On most houses that is somewhere above the roofline, so the work happens from the roof and nothing inside the house is touched.
- Above the roof: the usual case, since the exposed part takes the weather.
- Into the attic: when the damage continues below the roof deck, which we check from the attic before quoting.
- Liner and flue: if the flue is cracked, a stainless steel liner can go in while the chimney is open.
Every rebuild finishes with a new crown and cap, and step and counter flashing cut into the mortar joints.
Brick Housing Stock and Your Roof
Mostly single-family post-war and newer homes, with bay and lagoon homes along the water.
Homes on the water take wind and salt air, and many inland neighbourhoods reached replacement age together.
Based on the homes we see in Brick, these are the things worth asking about on an estimate:
- High-wind shingles. Ask for shingles rated for high wind, installed with the manufacturer's high-wind nailing pattern.
- Before storm season. Keep dated photos of the roof. After a coastal storm they make an insurance claim much easier.
- Attic ventilation. Original attics often have little venting. Ridge and soffit vents added during a replacement help the new roof last.
Thinking about chimney reconstruction? We inspect, photograph what we find and put the price in writing. Free, with no obligation.
Cost of Chimney Reconstruction for Brick Homes
A chimney rebuild is priced by how much of the stack comes down, its size and the number of flues, access on the roof, and the brick, crown and cap it gets. Flashing is included, because a rebuilt chimney flashed with old metal leaks in the same place. You get a written price after the inspection.
Permits and the Brick Construction Office
Roofing work in New Jersey is covered by the Uniform Construction Code, and each town's construction office decides what needs a permit and how the paperwork works. For chimney reconstruction in Brick, that means the Brick construction office.
We check what your job needs before work starts and tell you if a permit applies.
Chimney Reconstruction Near Brick
Chimney Reconstruction in towns bordering Brick:
Other services in Brick
Recent Roofing Projects
30 real jobs from around New Jersey. Tap a photo to see it larger.
What Homeowners Say About Our Chimney Reconstruction
Brick Chimney Reconstruction FAQs
Still have a question?
(201) 757-3945How long does a chimney rebuild take?
Most rebuilds above the roofline take one to three days, depending on the size of the chimney, how far down it goes, and the weather, since mortar needs dry days to cure.
Do I need a permit to rebuild a chimney in Brick?
Permit requirements are set by the Brick construction office under New Jersey's Uniform Construction Code, and masonry work on a chimney often needs one. We check before work starts.
Can you match the old brick?
We match as closely as we can in colour, size and texture. Old brick is not always still made, so the rebuilt section can look slightly different at first; we show you samples before we start.
Is a cracked or leaning chimney dangerous?
It can be. Loose bricks can fall, and a leaning stack can pull away from the house. Keep people clear of the area below it and call for an inspection; we photograph it and tell you plainly how urgent it is.